Lucki-Phase1
输入“/”快速插入
Lucki-Phase1
1.
Appearance Introduction
1.Mic Array: It's the 6 arrays of microphone used for voice interaction
2. The front-facing camera: use for detecting people under promotion mode
3. Screen: 10.1 inch 1200x1920 (1080P) color touch screen, for displaying and touching.
4.SIM card Slot, robot can support Wifi or mobile network.
5. The speaker is the mouth of the robot, for the output of all sounds.
6. Tray as default is 3 layers, each could load up to 10kg. Customer can adjust tray from 1 to 4 layers(
(If you need 4 layers, you need to purchase additional accessories)
7. RGBD camera and lidar are used for obstacle recognition and obstacle avoidance during the robot's daily walking process. In addition, lidar is also used for scanning when creating maps.
8. Top IR camera, use for identifying markers on top.
9. Power Switch: Long press for 3 seconds to turn on/off.
10. Emergency stop button: Pressing the emergency stop button in an emergency situation can temporarily suspend the robot from functioning. Turn the button clockwise to cancel the state.
11. Light belt, the light belt has 3 colors, blue represents working, green represents charging, and red represents emergency stop. In addition, there will be a rear turn signal for prompting the rear.
12. The charging port is used to connect the charging adapter.
13, product parameters: [Lucki] Product Parameters
Teaching video
新外观.mp4
70.86MB
2. Markers:
Function: A positioning marker is attached on the top of ceiling before creating a map. It is used for robot positioning during operation. After attaching the label, the stability of robot operation can be improved.
Difference: It is important to distinguish between the positioning marker and the safety marker when using them. The safety marker has the words "DANGER ZONE" on it, while the positioning marker does not.
Positioning Marker
Safety Marker